Electronics Industry Today – MLC Europe B.V.

The electronics industry makes consumer electronics, electronic equipment, and electrical components for various goods. Circuit boards, televisions, and mobile gadgets are typical items in the electronics industry. Telecommunications, networking, electronic components, industrial electronics, and consumer electronics are all included in the electronics sector.

Growth in The Electronics Industry

The electronics industry’s rapid expansion results from rising demand from developing market economies. As a result, numerous nations are manufacturing more electronics, and investments in the international manufacture of electronics have skyrocketed.

Globally rising consumer expenditure is accelerating the expansion of the electronics sector. Consumer demand for electronics increases together with the growth of developing economies. Electronics-producing nations now have sizable consumer populations that can afford new electronics. Additionally, the cost of producing electronics is falling due to increased competition, resulting in lower consumer prices.

Trends in The Electronic Industry

  • Advanced Materials

For many years, silicon has been the primary material used in the semiconductor industry, but there is a limit to how much silicon can be etched, lithographed, and patterned. As a result, new materials and architectures drive innovation to boost integrated circuit performance. For high performance and efficiency, startups and scaleups are exploring silicon substitutes and other semiconductor materials or composites like graphene and nanomaterials.

  • Immersive Technologies

Human labour is heavily reliant on various phases of electronics production. Human mistake is a possibility, and it unquestionably reduces manufacturing productivity overall. The use of immersive technologies is a successful approach to overcoming these difficulties. These approaches evaluate design objects at every conceivable scale, removing flaws in goods at the design stage. Before fabrication, they specifically look for design flaws in the circuitry and typical manufacturing flaws such as slivers, missing solder pads, and starved connections. Additionally, it makes it easier to train employees, produce prototypes, maintain assemblies, and let operators see workflows.

  • Organic Electronics

Comparing organic electronics to conventional inorganic electronics reveals many advantages. They have low power requirements, are inexpensive, flexible, indissoluble, optically clear, and cost-effective. Additionally, manufacturers’ preference for organic electronics is driven by the rise in awareness of sustainable development and environmentally friendly production. The upcoming trend in electronics production is believed to be the creation of devices using biodegradable and recyclable materials or designing circuits with microbial components. Additionally, using organic materials in producing electronic devices permits the use of safer, less readily accessible raw materials by electronics makers. As a result, it gives businesses new business opportunities, undoubtedly offering them a competitive edge over time.

  • Artificial Intelligence

Every industry is seeing a rise in the use of AI-powered solutions. Both increasing demand for cutting-edge AI-capable electronics components and improving product manufacturing and design procedures are two ways that AI affects the growth of the semiconductor manufacturing industry. Redesigning product development cycles, enhancing product design procedures, and lowering faults are not possible using conventional methods. However, the use of AI is overcoming all of these restrictions. Manufacturers can decrease downtime by implementing predictive maintenance in their manufacturing processes. Therefore, among the technologies driving the future of electronics production, artificial intelligence is one of the most significant.

  • Embedded Systems

These days, embedded systems are a necessary component of any electronic device, and they play a crucial role in determining the gadgets’ speed, security, size, and power. Embedded systems are in great demand since we are in the early stages of a connected world. Several advances are being made in the engineering and production of such systems to enhance performance, security, and connectivity capabilities. Additionally, these technologies help enhance machine control and monitoring in electronics production plants.

  • Internet of Things

The electronics manufacturing sector has never had more opportunities thanks to the Internet of Things explosive rise. It reevaluates the fabrication procedure and takes care of practices discovered to be challenging to implement using traditional methods. In other ways, the IoT makes it possible for electronic industrial devices to digitally link, self-process, and store data. Since sensors are the essential components that enable IoT applications, further advancements in sensor fabrication are also necessary. The switch to 5G-enabled gadgets also calls for faultless, cutting-edge semiconductors with more cost-effective, efficient architectures.

  • Miniaturised Electronics

Electronics can now be used in a variety of cutting-edge application fields because of miniaturisation. In particular, applications in the healthcare and automotive industries have space restrictions when it comes to integrating special equipment. Before now, the concept of downsizing was constrained by the practicality of their handling, display, and battery but not by the integrated electronics. Electronic components are being developed to be as tiny as possible while still being quick, dependable, and efficient. Incorporating ever-more features into a single component is a significant facet of miniaturisation. Worksheet and nanonet sensors, for instance, are two recent advancements in small electrical parts.

  • Printed Electronics

Printing electronics components on a semiconductor substrate is the most efficient technique to lower production costs. Therefore, producers are constantly looking for new technologies and improvements in traditional printing processes to address this difficulty. Printed electronics rely on conductive inks and frequently flexible films as opposed to conventional semiconductors, which use small wires as circuits. Furthermore, the development of flexible hybrid electronics is made possible by advances in printing technology. Startups and scaleups are creating solutions for cutting-edge printing technologies as a result.

  • Advanced IC Packaging

Along with chip design, chip packaging has gained popularity in recent years. Moore’s law-based scaling techniques for devices are no longer without their restrictions. The third strategy to benefit from scaling is to combine several sophisticated devices in a sophisticated package. So, semiconductor makers create new cutting-edge IC packaging technologies to enable better silicon integration in ever-smaller packages. Vertically stacking modular components enables manufacturers to provide customisation and increase yields. Furthermore, modern IC packaging streamlines production to reconcile client demands with total costs.

  • 3D Printing

Flat circuit boards are no longer required in electronics manufacturing, thanks to 3D printing. It makes it possible to create novel, creative designs and shapes that cannot be made with standard techniques. Electronic parts can also be produced by 3D printers as a single, continuous item, leading to fully functional electronics that need little to no assembly. As a result, this electronics manufacturing technique offers mass customisation, decentralises part production, and speeds up prototyping. Generally speaking, 3D printing technology allowed the fabrication of electronic components in 3D design, rather than just 2D, and introduced novel circuit stacking techniques.

MLC Europe B.V.

The market’s leading distributor of obsolete electronic parts is MLC Europe B.V. We take great pleasure in being able to source electronic components and industrial equipment for hundreds of customers worldwide. We have access to various electronic inventories of active and passive components from a global network of wholesale electronic parts sellers and distributors.

We have a wealth of experience supplying old electronic components to the robotics, automotive, aerospace, and medical industries. The likelihood of something not existing increases if we cannot find it.

We have over 26 categories to browse, shop through, and get all the items you might need. Contact us for any assistance, we will be happy to help you through your findings.


MLC Europe | Steps Toward a Sustainable Future

Electronics’ easy usage and quick disposal are due to the components that make them possible. Compounds poisonous to humans and damaging to ecosystems are found in parts of smartphones, laptops, and even kitchen appliances.

E-waste has accumulated as devices have gotten cheaper to purchase. E-waste is “the fastest-growing waste stream in the world,” according to a 2019 report from the World Economic Forum, and for a good reason. According to the U.N.’s Global E-waste Monitor, individuals produced more than 50 million metric tons of e-waste that same year. Much of it is burned, stacked up in landfills, or exported to low-income nations where it poses risks to the environment and public health.

The Urgency of Making Environmentally-Friendly Electronics

Despite these issues, only 17.4% of the world’s electronic waste is formally collected and recycled. Our existing linear “take, manufacture, and dispose of” approach for electronics is the source of the issue; if we want to keep using our electronic equipment, we must switch to a more sustainable method. The conventional linear economic model extensively uses inexpensive, easily accessible materials and energy, disregards waste, and employs techniques like planned obsolescence, in which products are made to have short lifespans to entice repeat consumer purchases.

The electronics sector must work toward a circular economy to address these problems. The life cycle of items is extended, and waste is kept to a minimum in the “circular economy,” which is a production and consumption model involving sharing, leasing, reusing, repairing, refurbishing, and recycling existing resources and products as long as feasible. Materials are preserved in the economy whenever possible when products end their valuable lives.

Utilising fewer resources and prolonging the life of products and their components are two ways that circular business models enable businesses to gain value. These models can open up new economic prospects for enterprises with innovative business models and the more effective utilisation of raw materials. However, there is an even greater need for a circular economy in electronics to prevent resource depletion, environmental damage, and health effects. Additionally, this economy must assist a broader shift to a Net Zero economy to lessen the effects of GHG-induced climate change.

5 Steps to a Sustainable Future

How to strike a balance between diminishing supply and increasing amounts of electronic trash presents a new problem for the electronics sector. To meet the challenge, innovative, long-lasting strategies are required.
The demand for electronics is rising due to the industrial sector’s digitalisation and the expansion of digital services. By 2050, the amount of electronics consumed worldwide is anticipated to double. Only 20% of electronic waste is effectively recycled, and its volume is increasing at a 6.5% annual pace. The status quo opposes the EU’s goals, which call for Finland to achieve carbon neutrality by 2035 and the EU to do so by 2050. Electronics and ICT are recognised as essential value chains in the Circular Economy Action Plan of the European Commission.


Environmental goals must be incorporated into the design process and technical requirements throughout a product’s lifecycle. Energy efficiency, material efficiency, flexible and prolonged product lifecycles, and material recyclability are just a few of the goals of ecodesign. Each product component must be separated at any point in the manufacturing process and used as secondary material.

The EU Ecodesign Directive specifies minimum standards for general and category-based products, although ecodesign can also have a more expansive goal of sustainable lifetime management. Utilising second-hand raw materials in new industrial ecosystems is one step toward waste-free circulation. Numerous businesses assist industrial clients in creating innovative recycled materials, goods, and procedures. These solutions extend the useful life of the materials and lessen the lack of raw materials.

Sustainable Choices of Raw Materials

Electronics manufacturing needs to utilise more raw materials made from naturally replenishable resources. Cellulosic materials like paper and nanocellulose are excellent examples, which companies and groups have already successfully employed as electronic printing platforms. Between 2011 and 2015, manufacturers took part in the ROPAS project, which entailed printing sensors on paper. Due to its potential for durability, nanocellulose could replace FR4 or PET films in circuit boards and electrical items. Nanocellulose can be used to create much thinner films while utilizing less material. Nanocellulose based on fibres is entirely biodegradable and is produced from renewable natural resources.

Innovation of New Biodegradable Materials

Additionally, the electronics sector requires bioplastics that safely decompose into carbon dioxide and water. These components are necessary for cutting-edge solutions, including sensors monitoring agricultural, environmental, and weather conditions and using single-use diagnostic tests for consumers. In these applications, the electronic parts must be at least somewhat biodegradable.

Another illustration is cutting-edge, biodegradable food product packaging. For instance, sensors attached to the packaging can monitor the temperature and determine whether the cold chain has been compromised after the fact. To avoid problems with the processing of packaging trash, these components must be biodegradable. Both the market and manufacturing quantities for novel bioplastics are expanding. These materials can potentially create new solutions because they can endure moisture better than cellulose-based substitutes.

Employing Energy and Material-Efficient Manufacturing Techniques

Many conventional methods of producing electronics rely on removing material gradually over time. Contrarily, roll-to-roll methods like printing only intended to add material where required. By doing this, production waste is decreased.

Proper Disposal and Recycling of Materials and Components

Not every situation calls for biodegradable solutions; in these circumstances, the circular economy is the best option. For instance, 1.5 billion new mobile phones are used every year. Old mobile phones end up in landfills or desk drawers, meaning their parts and materials are lost. Reusing these resources in the sector is necessary.


Smartphones, laptops, and wearable technology have become indispensable in our daily lives. Due to the boom of devices, the worldwide consumer electronics sector is now projected to be worth $1 trillion (rapidly growing). However, even though these devices are sometimes composed of sturdy materials like metal and plastic, they are frequently viewed as disposables and thrown away after usage, creating enormous volumes of waste.

The significance of environmentally conscious electronics design will only increase as governments and consumers become more “green conscious.” All of us who produce and develop electronic goods are involved in this industry-wide endeavour.

While many factors must be considered when building sustainable products, it is crucial to think about them immediately. These factors include the product’s design, materials, number of parts, size, and ethical suppliers.


Everything You Need To Know About Global Chip Shortage

Even though it should have been predictable, the global chip deficit, also known as the microchip shortage, seems to have caught everyone by surprise.

Currently, silicon chips are found in almost everything, including phones, computers, household appliances, and even automobiles. Furthermore, as technology advances, the greatest processors are no longer exclusive to the newest gaming PCs.

Significant chip shortages have happened before; for example, in 1988, due to excessive demand and in 2000, due to a scarcity of various Intel items, significant shortfalls of chips occurred on several occasions. Afterwards, in 2011, a Japanese earthquake led to a severe shortage of NAND memory and screens.

Chip shortages frequently result from issues with the supply chain or human labor. But instead of altering the production process to make it less susceptible to frequent needs, the sectors that depend on these chips have mostly continued doing business as usual.

And now that the most recent shortage, which started in 2020, is affecting every aspect of technology, from cars to the most cutting-edge graphics cards and gaming consoles, everyone is frantically trying to understand what the global chip shortage is, why it’s happening, and how long it will be before things get better.

The answers to some of those questions are simpler than others, but we’ve gathered as many resources as possible to help illustrate how we reached this point.



A global chip shortage occurs when the semiconductor industry cannot create enough chips to meet the needs of customers from other sectors, which impacts both. Given that they are present in almost all current electronic devices, these chips are essential to the technology sector.

Interlacing tiny semiconducting analogue circuits into silicon layers, integrated circuits are made. Over the past 70 years, this innovation has transformed technology and the globe, but it has also produced a challenging issue.

Significant shortages of every consumer good that contains electronics or uses them at some stage in its production could be caused by unanticipated outages. Everything from the standard of city train service to the transportation of food to supermarkets may be impacted by this. It affects far more than just how easily accessible consumer items like the greatest monitors, iPads, and PCs are.

We are currently living in such a hectic period. Over the past two years, individuals have faced shortages of almost everything, which has had a significant impact on worldwide price inflation for most consumer items.


The ongoing COVID-19 pandemic, which began in late 2019, is mostly to blame for the most recent global chip scarcity. This led to two primary outcomes: supply chain problems brought on by labour shortages and a 13% rise in PC demand worldwide due to the transition to a work-from-home economy.

The growth of cryptocurrencies, particularly in the computing sector, worsened the scarcity. Since miners of these digital currencies introduced an unanticipated demand for these components, graphics cards and CPUs have been hard to acquire, making it even harder for the typical customer to find them.



Numerous industry experts have predicted when the semiconductor industry will recover from this global chip shortage, including representatives from Intel and AMD. Unfortunately, it is expected to continue through 2023.

It will take years for Intel’s CEO Pat Gelsinger’s company to recover fully since “demand increased to 20% year-over-year and disrupted supply chains produced a huge gap…and that rising demand has remained.” Moreover, Michael Dell, the co-founder and CEO of Dell, anticipates the scarcity will continue for a few more years.

Like other industry leaders, Lisa Su, CEO of AMD, predicts that the scarcity will start to ease in late 2022 since “the epidemic has only increased demand to a new level.” This was supported by prediction estimates from the industry analysis company Gartner, which predicted that it would continue through 2022 as well.

To improve chip manufacturing, TSMC and Quanta Computer, the only manufacturers of some of the greatest MacBook and Mac models, have been looking into moving or opening additional facilities. However, this won’t help the shortfall for years. Although it has been a similarly lengthy process, TSMC has been attempting to open new facilities in the US.

However, there is hope because recent changes have made the scarcity less severe. The supply of graphics cards and CPUs has gradually increased, which has served as a reasonably reliable indicator of the shortfall status. The decrease in Ethereum mining and cryptocurrency mining, in general, is one of the leading causes.

Chip manufacturing facilities built before the pandemic are beginning to operate. Some of the demands from work-from-home and hybrid workforces for new technology for their professions have mostly been satisfied and are unlikely to increase again the way they did in 2020.

It’s difficult to determine how close we are to a full recovery, if one is even achievable, given the constant influx of new digital items and the growing influence of computers in formerly analogue goods and services.


Medical Industry Innovations

Medical Industry Innovations


It has been many years since healthcare and technology are linked because they can provide efficient alternative to the traditional medical industry. Nowadays, the development of new technologies allows the medical industry to improve treatments and monitoring of patients. Therefore, it is a sector which needs electronic parts so that includes electronic components supplier.

The appearance of augmented reality is useful for medical education, especially in the United States where 96,000 doctors are needed to respond to the current needs. The healthcare applications can provide 3D training to improve the learning of the whole human body by showing 3D holographic images, which help to understand how our body works.

Moreover, it is easier to interact for doctors because they have more possibilities and facilities for training themselves. The augmented reality allows them to become more efficient during surgeries, where precision is essential.

Doctors have also to be efficient when making diagnostics that they provide to their patients. The Qualcomm Tricorder is a portable and wireless device that monitors and diagnoses health conditions in a very deep way.

It can detect 13 health conditions such as anemia, atrial fibrillation, diabete, pneumonia, mononucleosis etc. It can capture 5 real-time vital signs as well like blood pressure, oxygen saturation, heart and respiratory rate, then temperature.

Cardiac transplants are also an issue that need to be solved. There are about 50,000 candidates for transplantation and about 5,000 transplants per year. Moreover, organs are preserved in a cold solution which can cause serious damages to the heart.

Therefore, a warm blood perfusion system has been created to keep hearts beating and “breathing”. It allows them to maintain organs in good condition and prevent possible damages due to the preservation.

Another way to change habits in the healthcare industry is to find an alternative to traditional animal testing for drugs. It is provided by a new microchip which have the size of a memory stick. It is flexible, and it allows to mimic the environment of living organs to test drugs on it instead on animals. It is the beginning of what industrial devices can offer to the medical sector.

By using technology, healthcare industry has made progress especially thanks to the 3D printing. It is used in the healthcare industry for 15 years to create prosthetics and implants. Its future use forecast to improve the use of medicine by, for instance, producing optimal and personalized medication dose by using age, race, gender etc.

3D printing will also allow to create limitless dosage forms and print more complex release profiles to target and control drug release.

As an electronic component supplier, our mission is to provide all electronic parts that the medical sector needs. It is one of the filed where we are involved so we make our possible to have a complete electronic inventory to help the new healthcare technologies development.


A global expert of sourcing electronic components

MLC Europe is a global leader specialized in sourcing electronic components across the globe, who brings the pride of being the expert in international electronic sourcing service despite scarcity and pandemic situation. Clients in the European, US, Asian as well as Oceania market will find satisfaction as MLC’s sales and customer service system are expanding and available at internationals.

1. Expertise: The team of experts in sourcing electronics and electronic components managing a wide range of electronics can satisfy any requests from worldwide customers. These include capacitors, semiconductors, ICs, relays, crystal, connectors, resistors, SMDs and many more. The company’s primary focus is on active, passive and electromechanical components. The components with special standards can also be found, which have the applications in many specific industries such as military, automotive, aerospace, medical, telecommunication and more.

2. Network: MLC Europe has an extensive network of electronic manufacturers, brokers, distributors and stockers who have excess stock available at short notice. The existed contacts might not have an online presence and/or do not have inventory accessible online. This means that it is accessible for MLC to inventory which other suppliers may not be able to provide. It is within MLC Europe’s power to supply throughout the globe via our wide network of vendors worldwide. We help manufacturers, brokers and electronical engineers to get the parts they need when they cannot find these parts through their normal channels.

3. Values: Quality control: Quality is the first priority. All products are generally accompanied with ISO testing certificates. The company also works with well known 3rd party electronics testing laboratories who are compliant to ISO 9001:2008 and incorporate the requirements of AS9100C. This is to ensure the best quality of products to the customers in various industries that require high accuracy such as aerospace, military, healthcare and automotive. It is also MLC’s responsibility to deliver electronics that comply with RoHS (Restriction of Hazardous Substances), also known as Directive 2002/95/EC, set up by the European Union to control the use of specific hazardous materials found in electronic products. X-ray fluorescence (XRF) testing can also be performed on a wide range of electronics for the correct standard of required products.

4. Professional consultation: The team of talented professionals is always available for consultation. Any inquires related to products, specification, quality testing, delivery, electronic market or pricing will be answered in a short time. These experts make sure to assist your business with deep understanding of electronics sector and industry.

5. Prompt service: Time is essential, this is always be clear as precious time of your business will be treasured. To buy electronic components with MLC Europe will not only save customers time in sourcing all needed components, but also offer a customized delivery scheme to assist your business. All products will be delivered in the timely manner at your prefered location with impeccable packaging quality.

COO of MLC Europe, David Murphy, commented on the strategy of the company: “MLC Europe is expanding and growing strong. We prioritize the satisfaction of our customers with the best quality products and the fast service to assist your business. Our team of professionals in electronic industry can be contacted anytime for your inquiries and consultation.” For more information about what we have to offer, don’t hesitate to contact us via our website or email

MLC Europe – the leading European electronic distributor.